Elinchrom RX 1200 Instruções de Operação descarregar pdf (Página 13)

The charge socket is as well the interface for the EL-Skyport Trigger and Remote System.

With the EL-Skyport RX Trigger Set 19362, the Digital RX can be triggered wireless, up to

approximatly 100 m distance. Apart from triggering, the Transmitter offers modelling lamp on/off

settings and ash power control in 1/10th steps.

By using the EL-Skyport Computer Remote / Trigger Set 19361,

all Digital RX functions can be controlled and operated with a Mac°

or Windows° computer.

For details of the most advanced wireless system please visit :

www.elinchrom.com/products/RX Multi Remote/EL-Skyport

Troubleshooting

1. The mains switch (3) is ON, but not illuminated

• switch OFF the unit and change the mains fuse (2)

• Use only time-lag fuse (16 AT), corresponding to the Digital RX pack

2. The switch (3) is lit, the green led of the open ash (5) is illuminated and the touch

A or B (18 - 19) is activated but does not ash

• the ashtube in the ashhead may be faulty

• If replacing the lamphead does not solve the problem, the cause could be a

component failure => please return the unit to an authorised Elinchrom service.

3. The ON/OFF switch (3) is lit but the open ash signal (5) is not lit

• Temporary break for overheating, caused by fast ash sequences or ventilation

slots obturated

• Fan cooling defective => the unit turns off automatically and cannot be red any

more. After a break for cooling, the ash is ready again for operation.

• If after several minutes of break for cooling the ready signal (5) is not lit, the cause

could be a component failure. However, high voltage may remain on the capacitor

circuits.

Wireless Remote Control and Flash Triggering

• For your safety, never open your power pack.

• Do not attempt to repair the unit yourself.

• Please send the unit to your elinchrom agent

1 2 ... 8 9 10 11 12 13 14 15 16

Sem comentários

Elinchrom RX 1200 Instruções de Operação Página 13